Named nets not connected in Eagle board designEAGLE: how to find where the pin is connected - navigating fairly large schematicsPlease review my board designEagle PCB design: wire names for multiple power/gnd pinsHow to connect VCC and GND connections of 4050 buffer IC on Eagle?GND signals not connecting to Polygon in EagleEagle Autorouter Ignoring Ground PlaneCircuit schematic in Eagle seems to connected in series in board layoutmultiple planes (fills) in eagleInvalid nets in Eagle PCB board projectEAGLE schematic - capacitors and resistors all incorrectly connect to each other in BOARD
Why can't we use freedom of speech and expression to incite people to rebel against government in India?
Has a sovereign Communist government ever run, and conceded loss, on a fair election?
An Undercover Army
Professor forcing me to attend a conference
I've given my players a lot of magic items. Is it reasonable for me to give them harder encounters?
What is a term for a function that when called repeatedly, has the same effect as calling once?
Can you run a ground wire from stove directly to ground pole in the ground
Under what conditions would I NOT add my Proficiency Bonus to a Spell Attack Roll (or Saving Throw DC)?
Where is the fallacy here?
Do natural melee weapons (from racial traits) trigger Improved Divine Smite?
Practical reasons to have both a large police force and bounty hunting network?
Did Amazon pay $0 in taxes last year?
School performs periodic password audits. Is my password compromised?
The Key to the Door
The need of reserving one's ability in job interviews
Why do phishing e-mails use faked e-mail addresses instead of the real one?
Convert an array of objects to array of the objects' values
How to write a chaotic neutral protagonist and prevent my readers from thinking they are evil?
Computing the volume of a simplex-like object with constraints
How do you make a gun that shoots melee weapons and/or swords?
What is the meaning of option 'by' in TikZ Intersections
What is the oldest European royal house?
Called into a meeting and told we are being made redundant (laid off) and "not to share outside". Can I tell my partner?
Is divide-by-zero a security vulnerability?
Named nets not connected in Eagle board design
EAGLE: how to find where the pin is connected - navigating fairly large schematicsPlease review my board designEagle PCB design: wire names for multiple power/gnd pinsHow to connect VCC and GND connections of 4050 buffer IC on Eagle?GND signals not connecting to Polygon in EagleEagle Autorouter Ignoring Ground PlaneCircuit schematic in Eagle seems to connected in series in board layoutmultiple planes (fills) in eagleInvalid nets in Eagle PCB board projectEAGLE schematic - capacitors and resistors all incorrectly connect to each other in BOARD
$begingroup$
I set up my schematic in Eagle and used named nets to make all of the connections. If I highlight any of the connections in the schematic everything lights up properly.
When I switch to board design though most of the connections are missing. I have GND and VCC nets, each with multiple connections which show up properly on the board. But all of the point to point connections (connector to IC) are missing.
Any idea what I'm doing wrong?
eagle board
asked 10 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
add a comment |
$begingroup$
I set up my schematic in Eagle and used named nets to make all of the connections. If I highlight any of the connections in the schematic everything lights up properly.
When I switch to board design though most of the connections are missing. I have GND and VCC nets, each with multiple connections which show up properly on the board. But all of the point to point connections (connector to IC) are missing.
Any idea what I'm doing wrong?
eagle board
asked 10 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
$begingroup$
I set up my schematic in Eagle and used named nets to make all of the connections. If I highlight any of the connections in the schematic everything lights up properly.
When I switch to board design though most of the connections are missing. I have GND and VCC nets, each with multiple connections which show up properly on the board. But all of the point to point connections (connector to IC) are missing.
Any idea what I'm doing wrong?
eagle board
asked 10 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
I set up my schematic in Eagle and used named nets to make all of the connections. If I highlight any of the connections in the schematic everything lights up properly.
When I switch to board design though most of the connections are missing. I have GND and VCC nets, each with multiple connections which show up properly on the board. But all of the point to point connections (connector to IC) are missing.
Any idea what I'm doing wrong?
eagle board
eagle board
asked 10 hours ago
scottintheboothscottinthebooth
1263
asked 10 hours ago
scottintheboothscottinthebooth
1263
asked 10 hours ago
scottintheboothscottinthebooth
1263
asked 10 hours ago
scottintheboothscottinthebooth
1263
asked 10 hours ago
scottintheboothscottinthebooth
1263
1263
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
The nets weren't connected to the actual part. I was able to pick up each IC and drop it back on the nets and they all connected. Ratsnest shows up properly now.
answered 8 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
);
);
, "mathjax-editing");
StackExchange.ifUsing("editor", function ()
return StackExchange.using("schematics", function ()
StackExchange.schematics.init();
);
, "cicuitlab");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "135"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426139%2fnamed-nets-not-connected-in-eagle-board-design%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
The nets weren't connected to the actual part. I was able to pick up each IC and drop it back on the nets and they all connected. Ratsnest shows up properly now.
answered 8 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
$begingroup$
The nets weren't connected to the actual part. I was able to pick up each IC and drop it back on the nets and they all connected. Ratsnest shows up properly now.
answered 8 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
$begingroup$
The nets weren't connected to the actual part. I was able to pick up each IC and drop it back on the nets and they all connected. Ratsnest shows up properly now.
answered 8 hours ago
scottintheboothscottinthebooth
1263
$endgroup$
The nets weren't connected to the actual part. I was able to pick up each IC and drop it back on the nets and they all connected. Ratsnest shows up properly now.
answered 8 hours ago
scottintheboothscottinthebooth
1263
answered 8 hours ago
scottintheboothscottinthebooth
1263
answered 8 hours ago
scottintheboothscottinthebooth
1263
answered 8 hours ago
scottintheboothscottinthebooth
1263
1263
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
Ah, yes. I've run into that before, but I forgot about it.
$endgroup$
– Dave Tweed♦
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
$begingroup$
I appreciate your help!
$endgroup$
– scottinthebooth
8 hours ago
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426139%2fnamed-nets-not-connected-in-eagle-board-design%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
I have never seen this fail like this. Do you have all of the copper layers visible? It's possible that some of the nets have already been routed, but you're just not seeing them. Any chance you accidentally ran the autorouter at some point? Otherwise, it may be time to delete all of the .brd files and create a fresh layout from the schematic.
$endgroup$
– Dave Tweed♦
9 hours ago
$begingroup$
All of the layers are visible and nothing has been auto-routed. I deleted the BRD file and created a new one with the same results. I found a possible fix here element14.com/community/thread/11927/l/… I'll report back with results
$endgroup$
– scottinthebooth
8 hours ago